EX17008 Web-Smart Switch Installation Guide
Copyright 2020 EtherWAN Systems, Inc.
Page 2
All Rights Reserved
EX17008
02/25/2020
W70G-E17008XQ3
F.
In the left pane, click
Administrator >
System IP Configuration
.
G.
At the System IP Configuration page, perform
one of these steps next to
IP Configure
:
-
If your network uses a DHCP server, click
DHCP
.
-
If your network uses static IP addresses,
click
Static
. Enter the switch’s
IP
Address, Subnet Mask
, and
Gateway
settings.
H.
Click
Update
.
I.
In the left pane, click
Administrator >
Authentication Configuration
.
J.
At the Authentication Configuration page,
complete the following fields:
-
Username
= enter a new username.
-
Password
= enter a new password.
-
Confirm
= re-enter the new password.
Username and password are case-sensitive.
Permitted characters are a-z, A-Z, 0-9,
underscore, and plus, minus, and equals signs.
K.
Click
Update
.
7
Front Panel LEDs
LED
Color Status
Power
Yellow ON = switch is receiving power.
PoE
(port number)
Green ON = Power Device (PD) is connected.
OFF = PD is disconnected.
Link/ACT
(port number)
Green
ON = valid network connection.
OFF = no data transmission on port.
Flashing = port is sending or receiving
data.
Congratulations!
You have successfully
performed a basic installation. For advanced
configuration information, refer to the user
guide.
Click here
Click here