EtherWAN ED3638, Быстрый старт, Страница: 10 / 17

ED3638 www.etherwan.com
User’s Manual
10
One-Channel Hardened Ethernet Extender
Ports
The Hardened Ethernet Extender provides TX ports and one Ethernet
Extender port.
For the TX ports, it uses RJ-45 connector and auto senses the speed of
10/100Mbps.
For the Ethernet Extender port, it uses BNC connectors and auto senses
the speed of Link (below 20)/20/40/60/80/100Mbps.
Ethernet Extender Mode Settings
Ethernet Extender mode settings are made very simple by means of a DIP
(Dual Inline Package) switch on the top panel of the Hardened Ethernet
Extender.
DIP Switch
DIP
Switch
Down Up
ED3638T
PoL
Disable Power over Link Enable Power over Link
Type
Std (Standard)
Standard line speed
Better noise immunity Perf (Performance)
Better line speed
Poor noise immunity
ED3638R
Mode
Loc (Local)
Set ED3638R to Local Mode Rmt (Remote)
Set ED3638R to Remote Mode
Type
Std (Standard)
Standard line speed
Better noise immunity Perf (Performance)
Better line speed
Poor noise immunity