Etesia rmcb Скачать руководство пользователя страница 4

4

1• YoUr sAFetY And thAt oF others

• Always fill in the fuel tank outside a building in an open space. do 

not smoke during this operation.

• Add fuel before starting the engine.

• never remove the fuel cap whilst the engine is running or hot.

• Leave the engine to cool for few minutes before filling.

• ensure that the fuel cork and fuel tank are replaced correctly.

• If you have tiped over fuel, do not attempt to start the engine 

remove  the mower from the affected area and take care not to 

ignite any undispersed fuel vapour.

• do not modify the regulator springs, rods or other parts to increase 

the engine speed. Operate the engine at the recommended speed.

• do not check the spark by removing the spark plug. Use an 

approved checking system.

• do not pull the starter while the spark plug is removed. If the engine  

is flooted, turn the fuel control to the Max. position and start the 

engine until it starts up.

• do not knock the engine wheel with a hammer or a hard object.

otherwise, the wheel may break during operation. have all major 

servicing operations performed by an authorised etesIA mechanic 

who has the appropriate tools.

• do not use the engine without the silencer. Check the silencer 

regularly and have it replaced if it’s damaged or leaking.

• do not touch the exhaust, cylinder or fins when hot. otherwise, you 

may get burnt.

• do not use the mower in wooded areas, brush fallow or grassy 

ground if the exhaust is not fitted with a spark arrester (the spark 

arrester must be kept in good condition by the  owner or the user).

• do not start the engine when the air filter or its cover is removed.

• to prevent the engine from starting accidentally, remove the spark 

plug cap during servicing operations.

• Clean the cylinder fins and regulator mechanism of any dirt, residue 

of grass and other materials which could alter the  engine speed.

• Pull the starter cord slowly until you feel resistance. then pull it 

energetically to prevent recoiling and hurting your hand or arm.

• Check the fuel pipe and connections for cracks and leaks and have 

them changed if necessary. 

• the spare blades must only be fitted on machines for which they are 

designed, in accordance with the instructions.

• Use only original etesIA spare parts. the use of inferior quality 

parts can damage the engine.

responsibility

• etesia will not be held responsible in the event of failure to comply 

with this manual or with current regulations.

• never attempt to modify yourself your propelled mower without 

any prior approval from the manufacturer.

• Unauthorized adjustments could be dangerous and result in 

serious injury to the user. no responsibility will be accepted 

by the manufacturer in the case of failure to comply with these 

instructions.

IdeNtIfIcAtIoN of the MoWeR

• the serial number of your mower is on the identification label on 

your mower on the top of the ejection channel. Always give this 

number to your Dealer for all servicing on your mower.

• You will only be ready to use this mower after you read the safety 

instructions.

Содержание rmcb

























Отзывы: