Etesia Pro 53 LH, Руководство пользователя, Страница: 16 / 20

1
Most operating problems are due to wrong handling and using, poor use of the lawnmower or the lack of normal recommended maintenance.
Should breakdown remain, please contact your ETESIA dealer.
Before doing anything, disconnect the spark plug cap and close the fuel valve.
ProBLeM origin soLUTion
Machine does not want to start Lack of fuel Fill the tank and open the fuel tap
Spark is full of dust or defective Clean and replace the spark
Too much fuel (the motor has flooded) Remove the spark and dry the engine by
pulling the starter
Air filter needs cleaning Clean or replace the filter
Irregular operation, strong vibration Blade balance Balance or replace it
Cutting blade loose Tighten the attaching screws
Bad cutting, grassbox does not fill itself
correctly
Blunt blade Sharpened or replace the blade
Blade does not turn on an horizontal plan Replace the blade
Cutting height is too low Lift it slightly
Too quick drive Drive more slowly
Engine run is too low Put the gas lever on [MAXI] position
Grass remains Height adjustment too low Lift the cutting height
Cutting deck clogged with grass and and
earth remains
Clean the deck
Blade clutch not working properly Long distance control trouble Adjust the cable tension
Reduce forward speed slot Long distance control trouble Adjust control cables
Does not rest on disengaged position Dead point stop needs adjustment Ask your ETESIA dealer to adjust the dead
point
iMPorTanT :
Only use ETESIA parts as replacements. The quality of the work, the life of the lawnmower and your safety depend on it.
In addition to risks incurred by the user, the use of parts other than the manufacturer’s will result in the cancellation of the warranty for any
damage caused. ETESIA refuse to accept responsibility for accidents due to the use of parts not coming from the manufacturer.
Page Element Before each cutting After the 5 first
hours
Every 50 h or each
season
Periodically Observation
11 Engine oil Check the level and
adjust
Empty the
frame
Empty the
frame (*)
Necessary to be
able to claim for
warranty
14 Air filter Replace the
cartridge
Clean every 25
hours
14 Spark Clean - adjust the
electrodes
Replace if used too
much
Replace every 100
hours
14 Cooling system Cleaning around the
muffler
Check and clean
15 Hydraulic oil Complete and
clean the
magnetical plug
Complete and
clean the
magnetical plug
See your
ETESIA dealer
(*) Every 25 hours if the mower is used under tough conditions (dust, heat, heavy loads).
10• STANDARD REPAIRS – BREAKDOWNS AND SOLUTIONS
11• REGULAR MAINTENANCE SUMMARY