Etesia PABCTS, Руководство пользователя, Страница: 15 / 22

15
8• MAINTENANCE
Remove the safety key and the battery before any maintenance.
The best maintenance is above all the regular cleaning of your mower
after each use (frame, wheels, transmission system...).
ROUTINE MAINTENANCE OF THE MOTOR,
THE RECHARGEABLE BATTERY AND THE
CHARGER
Before any maintenance, remove the security key.
Motor maintenance
The brushless electric motor is considered maintenance-free. However,
it is sensitive to abnormal overheating and humidity.
You should take care of:
- Ensuring regular cleaning of the mower by cleaning it up especially
around the engine cowling of all the grass that could be settled there.
- Keeping the mower water-jet clean,
- Storing the mower in a dry, well-ventilated place.
Maintaining the rechargeable battery
The rechargeable battery of your mower only requires a few precau-
tions and maintenance. However, it is sensitive to shocks, humidity,
and abnormal overheating.
You should take care of:
- Being careful not to expose it to shock, humidity and heat.
- Ensuring regular cleaning with a dry rag without water.
- Ensuring its connectors are clean using a non-metallic soft brush.
- Carrying out the scheduled maintenance work for prolonged period
without use.
- Storing it in a dry, well-ventilated place at a lower temperature than
26°C.
Do not carry out repairs yourself. In case of pro-
blems, contact a ETESIA-qualified specialist.
Charger maintenance
Before any maintenance, unplug the power cord plug from
the 230 V outlet.
The charger 53342 does not require any special maintenance. However,
it is sensitive to shocks, abnormal heating, humidity and dust.
You should take care of:
- Making sure to unplug it when not in use,
- Ensuring regular cleaning with a dry rag or as needed, with a soft
brush.
- Avoiding exposure to shock, heat, water and dust.
- Storing it in a dry, well ventilated area.
CLEANING
• Once the engine has been switched off and allowed to cool, unhook
the grass collector, undo the lower fastening nuts on the handlebar
as far as the screw collar so as to be able to straighten the handlebar,
and lift the chassis from the front to put it into the vertical position
(picture 14).
ADVICE:
do not undo the two middle fastening nuts. The upper
part of the handlebar stays aligned with lower parts.
• Clean the lawnmower particularly the inside of the cutting deck.
Remove all debris of cut grass, preferably using a scraper and a
brush.
CHECK SAFETY DISPOSITION
• Regularly check the condition of the safety scuttle and the collecting
bin. Replace them as soon as they show signs of deterioration.
• Ensure that the safety control works properly: safety lever released =
stoppage of cutting blade in less than 3 seconds.
If you notice abnormalities in operation, have the safety system checked
by a service engineer approved by ETESIA.
7• OPERATING INSTRUCTIONS
• Always adjust the cutting height according to the height and density
of the grass to be cut and the weather conditions.
• Look at the mown area: there should be no grass clippings on the
surface. If there are grass tracks visible, the cutting height should be
raised high enough to achieve the result sought.
MOWING WITH REAR EJECTION
For the occasional mowing of tall grass, you can use your lawnmower
without the grass collector or the removable mulching insert.
The deflector is designed to protect you. So only lift when you need
to remove the grass box. It automatically repositions itself afterwards.
Do not use the lawnmower if the shield / deflector is not in place. Do
not remove it if for any reason whatsoever.
ADVICE:
After initially changing to the high position, you can reins-
tall the housing insert (mulching configuration) and finish off mowing
by a second run at the required cutting height.