Chapter 7 Setup
>
7.2 Basic Setup
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
154
Copyright 2010 FUJITSU LIMITED
P3AM-3042-07ENZ0
A confirmation screen appears.
3-2
Click the [OK] button.
The volume is created, and the [Define Host] screen appears.
4
Set up the host.
Specify information for the server being connected to the ETERNUS DX60/DX80/DX90.
Setting screens will vary depending on the ETERNUS DX60/DX80/DX90 model.
■
For Fibre Channel
On the [Setup FC Host] screen, register the Fibre Channel card WWN for the server being
connected to the ETERNUS DX60/DX80/DX90.
(1)
Click the [Add] button on the [Setup FC Host] screen.
(2)
Specify a WWN, server name, and host response.
Figure 7.15 [Setup FC Host] screen
(3)
Specify the other necessary items, and click the [Add] button.
The target FC host is displayed in the "Registered FC Host List" field.
(4)
When adding another FC host, repeat
Step (2)
and
Step (3)
.
If another FC host does not need to be added, click the [Done] button.
(5)
Click the [Next >] button.
A confirmation screen appears.
(6)
Click the [OK] button.
The settings are reflected and the [Configure Affinity Group] screen in
Step 5
appears.
IMPORTANT
When the Host Affinity function is not used, the host setting is not
required.
IMPORTANT
When a FC switch is connected to the ETERNUS DX60/DX80/DX90,
settings for FC switch and the server (FC host) must be completed in
advance.