Eternico AET-MS330SB, Руководство пользователя

Страница: 8 / 72

8 ENGLISH
2.4 G operating mode selection
Installation
The USB receiver is located in the space next to the battery. Turn the mouse upside down,
gently push the battery cover, and slide it outward. Remove the USB receiver from the inside of
the mouse and insert it into the USB-A port of your computer.
The mouse is installed automatically so you can control the mouse quickly and comfortably.
Bluetooth operating mode selection
1. Press the operating mode selection button repeatedly to select the BT1 (Bluetooth 1) or
BT2 (Bluetooth 2) mode. The LED indicator of the selected mode lights up.
2. Press and hold the operating mode selection button for more than 3 seconds to enter
the pairing process. The LED indicator of the selected mode will flash. The pairing time
is 3 minutes.
3. On your computer, click "Add Device - Bluetooth" to start the device search.
4. Regardless of the Bluetooth 1/Bluetooth 2 operating mode selection, the device name will
appear as MS330 BT3.0 and MS330 BT5.0.
5. If the pairing was successful, the LED indicator of the selected operating mode will go out
after approx. 2 seconds and the mouse cursor will appear on the display.
CLEANING
Keep the wireless mouse clean. Turn the switch to the "OFF" position before cleaning.
Use only a dry, clean cloth for cleaning. Do not use harsh cleaners, solvents, gasoline or other
similar substances. Never wash the wireless mouse with water and do not immerse it in water.
If you will not be using the wireless mouse for an extended period of time, set the power switch
to "OFF" and remove the battery.
INSTRUCTIONS