ETERNAL RIVAL
MidTier Enclosure
Hybrid X
Manual
Hardware
1A
1B
2
3A 3B
4
5
6
Included with
additional
acrylic top
spacer (b)
Included with
additional
acrylic
bottom spacer
panel (E2)
(X) indicates the qty with additonal plexi spacer add-on
*Joystick hardware in a seperate ziplock bag with directions
*Brook PCB stands in a seperate ziplock bag with directions
x8(4)
(4)
x6
x14-18
(14)
x2
x2
x6
(4-8)
A
B
C
D
E E2
***Will vary depnding your button layout
Diagrams will not reflect the hybrid X panels
but build is the same as they mid-tier cases
Mounting
Top Spacer - add on
Top
Back Panel
Front Panel
Bottom Window
Bottom
(Bottom Spacer - Add on)
F1
F2
G
Side
panel
Joystick
Spacer
Artwork if Purchased
1A
A
2
2
C
1A
B
A
Notice
Countersink hole
on top. Screw will be
flush to the panel.
Notice
Countersink hole
on top. Screw will be
flush to the panel.
Step 1 - Mounting joystick and PCB
Step 2 - Assembling the top
3. Place flat head (1a) screw into
countersink holes and
screw it to the the
metal stands (2) by hand x2
1. Place (C) on top of (A) and hold it together by hand
screwing the pillar (2) to the screw (1a) placed through
the 2 panels. -If you have artwork you will place below
top panel (c)
-If you have a spacer panel (b) use screw (1b)
2. Once the top panels are assmebled you can
place the buttons in.
1. Mount the joystick*
2. Mount the Brook PCB*
*Directions in seperate ziplock bag.
