3
Safety Precautions
●
To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
●
Do not spill water or other liquids into or on to your unit.
●
Be sure that the local power outlet matches that of the required voltage for your unit.
●
Do not attempt to operate this unit if the power cord has been frayed or broken. Do not
attempt to remove or break off the ground prong from the electrical cord. This prong is used
to reduce the risk of electrical shock and fire in case of an internal short.
●
Disconnect from main power before making any type of connection.
●
Do not remove the cover under any conditions. There are no user serviceable parts inside.
●
Never operate this unit when its cover is removed.
●
Never plug this unit in to a dimmer pack.
●
Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6”
(15cm) between this device and a wall.
●
Do not attempt to operate this unit, if it becomes damaged.
●
This unit is intended for indoor use only; use of this product outdoors voids all warranties.
●
During long periods of non-
use, disconnect the unit‟s main power.
●
Always mount this unit in safe and stable matter.
●
Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to the point they exit from the
unit.
●
Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See
“Cleaning” for details.
●
Heat -The appliance should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including amplifiers) that produce heat.
●
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked change in
performance
●
Fuse standard is2A/250V
●
Grounded using yellow/green line
●
The ambient temperature must always be under +35° C
Set Up
Power Supply:
Before plugging your unit in, be sure the source voltage in your area matches
the required voltage for your
CUBE™ RGBA. The CUBE™ RGBA is workable in
100-220V/50~60Hz. Because line voltage may vary from venue to venue, you should be sure
your unit voltage matches the wall outlet voltage before attempting to operate you fixture.
Operating Instructions
Operating Modes: You can use the
CUBE™ RGBA in 5 ways:
Sound activation
– The unit will activated by the sound signal.
Static display
– The unit will display the color in static way.
