Model:
WS120PIR
PIR Wall Switch
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING YOUR NEW SWITCH
PLEASE RETAIN FOR FUTURE REFERENCE
SAFETY AND INSTALLATION INSTRUCTIONS
110224-2BT(PA)
Pack contents:
1 x PIR wall switch
2 x M3 fixing screws
2 x plastic screw covers
1 x instruction leaftet
Electronic
Switch
• 2 wire connection (live only)
• 16 amp relay (see load, below)
• Override Auto / ON switch
• Mounting height: 1.2m - 2m
• Detection angle: 120°
• Max detection distance:12m
• Lux level: 0-20l ux - 2000 lux
• Time: 5 sec - 15 min
• Voltage: 220 - 240Vac - 50Hz
• Standby power: less than 1 watt
HELPLINE:
• T: 01933 673 144
• F: 01933 678 083
• E: [email protected]
Visit our website:
www.eterna-lighting.co.uk
IMPORTANT
The LUX and TIME controls are delicate and great care should be taken when making adjustments not to
exceed the limit of the controls.
When the mains power is disconnected, the battery will discharge if the battery switch is left in the ON
position. Once power is restored, the switch may operate erratically until the battery has recharged.
The time to return to normal operation will depend on how long the mains was disconnected and the
frequency of triggering during the recharge period.
Some fluorescent light fittings do not switch reliably with automatic electronic devices such as this PIR
wall switch. A power factor correction (PFC) capacitor may be required. If your fluorescent light fitting
does not switch correctly, we recommend connecting a PFC between the Live and Neutral terminals in
your light fitting of at least 1µF.
This device is not suitable for switching the following:-
• Heating and ventilation apparatus
• Contactors
• Discharge Lighting such as SON or Metal Halide
SPECIFICATIONS
LOAD
• Incandescent lighting:
10A
Max 2000W / Min 25W
• Fluorescent lighting:
3A
Max 500W
• Compact Fluorescent:
3A
EVENTUALLY, YOU MAY WANT TO REPLACE THIS LIGHT FITTING
When your switch comes to the end of its life or you choose to update or upgrade it by replacing it,
please do not dispose of it with your normal household waste, please recycle where facilities exist. When
you need to dispose of this fitting, check with your wholesaler or local authority for suitable options. New
regulations require the recycling of Waste from Electrical and Electronic Equipment (European “WEEE
Directive” effective August 2005—UK WEEE Regulations effective 2nd January 2007). Environment Agency
Registered Producer: WEE/GA0248QZ.
IF YOU EXPERIENCE PROBLEMS
If your switch is defective or develops a fault, please return it to the place where you bought it. You can
call our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting
product but may not be able to give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
