Model:
SA360PIR
Stand Alone Internal 360° PIR
Sensor
These instructions are provided as a guideline to assist you.
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING YOUR NEW ALARM
PLEASE RETAIN FOR FUTURE REFERENCE
SAFETY AND INSTALLATION INSTRUCTIONS
HELPLINE:
T: 01933 673 144 • F: 01933 678 083 • E: [email protected]
For answers to frequently asked questions (FAQs)
and other information visit our website:
www.eterna-lighting.co.uk
11
0804-SM
Pack contents:
SA360PIR
x 1
Screws
x 2
Wall Plugs
x 2
TECHNICAL INFORMATION
• Switching Load:
Maximum 8A 1600W Resistive or 500W Fluorescent
• Supply Voltage:
230V 50 Hz
• Time Control:
From approx 10 seconds to approx 15 minutes ± 2
• LUX Control:
Daylight & Night adjustable.
• Detection Range: 360° Up to 5 metre radius mounted at 3 metres.
• Mounting Height: 3 metre maximum.
• Protection:
Class I I
CLEANING:
Clean this PIR unit only with a soft dry cloth.
Do not use any chemical or abrasive cleaners.
EVENTUALLY, YOU MAY WANT TO REPLACE THIS FITTING:
When your PIR unit comes to the end of its life or you choose to update or upgrade it by replacing it,
please do not dispose of it with your normal household waste, please recycle where facilities exist. When
you need to dispose of this fitting, check with your retailer or local authority for suitable options. New
regulations require the recycling of Waste from Electrical and Electronic Equipment (European “WEEE
Directive” effective August 2005—UK WEEE Regulations effective 2nd January 2007). Environment Agency
Registered Producer: WEE/GA0248QZ
IF YOU EXPERIENCE PROBLEMS:
If your PIR unit is defective or develops a fault, please return it to the place where you bought it. You
can call our Helpline for advice. The Helpline will gladly give advice on any aspect of any Eterna Lighting
product but may not be able to give specific instructions regarding individual installations.
If in doubt, consult a qualified electrician.
