lAmp ReplACemenT:
For breakage information visit:
www.eterna-lighting.co.uk
• switch off the electricity at the mains.
• Release front cover.
• Remove and replace lamp making sure it sits
correctly in the lampholder. Do not use bare fingers.
• Replace front safety glass ensuring gasket is fitted
correctly and secure with single screw.
• Restore power.
ReplACemenT lAmp TYpe:
Wattage:
120W / 400W
supply Voltage:
240V
Type:
R7s Linear Halogen
SpeCiFiCATiOnS:
• Detection range: Max. 12M at approx. 180° scan
• Duration time adjustment: (5-10) seconds to (8±1)
minutes
• Detection circuitry: Passive Infra-Red (PIR)
• Weatherproof: IP44
• Power required: 230V~ 50 Hz
• Maximum load: 120W R7s Linear Halogen
(PIRF120BK / PIRF120WH)
• Maximum load: 400W R7s Linear Halogen
(PIRF400BK / PIRF400WH)
• Recommended power supply cable: H05Rn-F 3G
1.0mm
2
• Protection: class I
• Tempered Glass
SpeCiFiCATiOnS:
piR120BK / wH
piR400BK / wH
Voltage
240V
240V
Frequency
50Hz
50Hz
nominal lumens
2218 lm 8550 lm
Wattage
120W
400W
nominal life time of the lamp
2,000 hrs
2,000 hrs
number of switching cycles
before premature lamp
failure
8,000
8,000
colour temperature
2800K
2800K
Warm-up time up to 60 % of
the full light output
Instant full light
Instant full light
Dimmable
yes
yes
Lamp dimensions (mm)
78 x 10
118 x 10
cap type
R7s
R7s
