13
CHANNEL MAIN
CONTROL SECTION
5.
STEREO INPUT CHANNELS
Each STEREO channel has two line inputs into 1/4” jacks for the Right and Left input
signals.
When only the Right socket is used, this operates as the Mono Input,
and this Mono signal is fed to both Right and Left channels.
A further input possibility is available when using the LEFT input only with a Stereo jack plug. In this case
the Right and Left input signals should be connected to the Ring and Tip of the Stereo plug respectively.
The level of the input to these channels is controlled by the STEREO IN LEVEL (S 4).
The range of this control is from -
∞
- + 10dB, therefore functioning as a real volume control.
5.1
INPUT LEVEL
The same procedure as for the Mono channels should be followed (see 4.1).
All the other controls for the Stereo channels (3-BAND EQ, AUX 1, AUX 2, AUX 3
SENDS, PAN-POT etc., shown in the diagram on the right) are the same as those of
the Mono channels. They are activated means of the ROUTING push button (PB 2),
see Section 3 – ROUTING SYSTEM.
