Power supply
Headphone jack
USB port
To safely
remove the USB device from the port- press STOP, then press MENU and the Main Menu Interface
will appear. Now you can safely remove the USB device from the USB port.
SD/MMC/XD/MS
To safely remove the SD/MMC/XD/MS card from the reader slot - press STOP, then press MENU and
the Main Menu Interface will appear. Now you can safely remove the SD/MMC/XD/MS card from the
card reader slot.
SNOOZE/ALARM OFF button
ENTER
NAVIGATION buttons
MAIN MENU- The Main Menu is the default starting point after turning the unit "ON" .
Plug one end of the 9V AC adaptor into the DC input jack, then plug the other end into AC wall outlet.
For private listening, plug headphones into the headphone jack.
CAUTION: Listening at high volume for an extended period of time could cause damage to your ears.
Insert a USB data device into the USB port to enjoy photo, audio, or .AVI video & movie files.
Insert an SD/MMC/XD/MS card into the card reader slot to enjoy photo, audio, or video files.
When the alarm sounds there are two options for turning the alarm off, regular OFF and Snooze.
1) To turn the alarm off the alarm off, press and hold the SNOOZE/ALARM OFF button for 3 seconds to
disable the alarm function. If you want to sleep for an additional five minutes after the alarm sounds, lightly
press and release the SNOOZE/ALARM OFF button to activate the snooze function and the alarm will
sound again after about five minutes. Press and hold the SNOOZE /ALARM OFF button to end the snooze
cycle and turn the alarm completely off.
Press the Play/
button to begin playback or confirm a menu selection.
The Navigation buttons on the rear of the unit and the Remote Control are identified by
and . Use
these buttons to move through the all of the Menu selections. As you move through the Menu selections
stop when the Menu selection of your choice is highlighted.
Turn the Power ON to the Photo Frame unit by pressing Power button on the rear of the unit or on the
Remote Control. When the Power turns ON the Main Menu of the Photo Frame will be seen.
The Main Menu screen shows the ten main function options listed below.
Insert a USB data device or SD/MMC/XD/MS card into the reader / ports on the rear of the unit. Use the
NAVIGATION buttons
, , , and
to select one of the following Main Menu functions.
1. Photo
2. Music
3. Photo & Music
4. Movie (Video)
5. Setup
6. Calendar
7. Clock
8. Alarm
9. Copy/Delete
10. Favorite
, , ,
To Begin Using this Photo Frame
PLAY/ENTER button
ENTER button
ENTER
ENTER"
ENTER
The
button on the Remote Control is used to confirm your Menu selections. The
"PLAY/
button on the rear of the unit can also be used to confirm your selections. When the Menu
selection of your choice is highlighted press the
button to confirm your selection.
PHOTO (View Photos)
MUSIC
PHOTOS / MUSIC -
MOVIE
Press the NAVIGATION buttons and select the PHOTO option, press
to confirm this
selection. The Photo Frame will read the internal memory or the connected USB or
SD/MMC/XD/MS memory device for several seconds and will begin to play through each picture
automatically one by one. During playback press PLAY/PAUSE to pause, to resume playback
press PLAY/PAUSE again. Use the
buttons on the remote to skip forward or backward
through the playing photos.
When playing photos, press the STOP button at any time to view small versions (called
"Thumbnails") of each photo will appear on the screen, you can select a thumbnail to begin
playing in full scale by using the NAVIGATION buttons and then pressing
to play.
Using the NAVIGATION buttons, select Music from the Main Menu and press
to confirm
the selection and the player will begin to play music files automatically. Browse the menu that
appears on the screen and use the NAVIGATION UP/DOWN buttons to highlight a desired music
file, and then press
to play the selected file.
Using the NAVIGATION buttons, select Photo & Music from the Main Menu and press
to
start your photo slideshow with music playing simultaneously.
Using the NAVIGATION buttons, select Movie from the Main Menu and press
to confirm
the selection and the player will begin to play movie files automatically. Browse the menu that
appears on the screen and use the NAVIGATION UP/DOWN buttons to highlight desired movie
file, then press
to play selected file. Press and hold the
buttons on the remote
control to Fast Forward, or Fast Reverse through the video or movie file.
To choose the interval times, transition effects, and play modes for your photos,
highlight the SETUP selection from the MAIN Menu and press
.
Choose the interval time and transition effects for your photo slideshow. There are several time
interval options to choose from between photo changes: 5 seconds, 10 seconds, 15 seconds, 30
seconds, 1 minute, and 3 minutes.
Select one of the 16 transition effects to insert between changing photos
The options of auto play include
a.
on or off
b.
on or off
c.
on or off.
The options of Display Setup include
a.
: to adjust LCD Brightness settings.
b.
to adjust LCD Contrast settings.
c.
to adjust the LCD Color Saturation settings.
a.
: to select the On Screen Display languages of English, French, and
Spanish
ENTER
- Viewing "Thumbnails"
ENTER
(Playing Music)
ENTER
ENTER
(Play Photos with Music)
ENTER
(Play Video or Movie Files)
ENTER
ENTER
ENTER
A.) Photo Settings
a. Interval Time-
b. Transition Effect-
B.) Auto-Play
photo-
music -
movie -
LCD Brightness
LCD Contrast:
LCD Color Saturation:
D.) Custom Setup
OSD Language
This Photo Frame will only play .AVI format video or movie files.
8 7
8 7
or
or
SETUP MENU -
c. Show Type- Full-Screen or Auto-Fit Viewing modes
C.) Display Setup
Your photos can be viewed in Full-Screen (taking full advantage of this large 9 "LCD screen) or in Auto-Fit
3
4