Etec P6900, Руководство пользователя

Страница: 9 / 13

9
b) Press [RD/BACK] button two times and the phone will automatically go into
speakerphone mode and dial back the number.
5. Pre-Dialing
- Enter the desired telephone number first, with the handset in the base. The
number will be shown in the display.
- Then simply lift the handset or press the [SPEAKER] button and the entered
number will be dialed out automatically.
Note: You can use [DEL] key to edit or erase the number during this time if you
have made an error.
6. Baby Call Function
-
The Baby Call Function can be turned ON or OFF, by going into the Phone
Setup Mode (see # 6 above under ‘Setting Up’).
- Once Baby Call Function is turned On, and this function is activated, the
phone will automatically dial the preset number by simply pressing the
[SPEAKER] button and any button on the keypad.
7. To Program One-Touch Dialing (3) Memory (Speed Dial)
-
With the phone in the handset, enter the phone number you want to store, it
will be shown in the display.
- Press [STORE] button.
-
Then press the desired one-touch speed dial button (M1/M2/M3) on the right
side of the phone.
8. To Store 3 One-Touch Dialing Memories from Incoming Call
- With the phone in the handset, when you have an incoming call that is shown
in the display, press the [STORE] button.
- Then press the desired one-touch speed dial button (M1/M2/M3).
9. To Dial the One-Touch Dialing Memories (M1/M2/M3)
- Pick up the handset or press the speakerphone [SPEAKER] button.
-
Press your desired speed-dial number – M1, M2 or M3 to automatically dial
the number.
10. Tone / Pulse Selector
- To select the dialing mode that your telephone requires slide the [T-P] switch
on the right under side of the unit to ‘T’ position for ‘Tone Dialing’ and ‘P’
position for ‘Pulse Dialing’. Most phone systems today use ‘Tone’ dialing.