Etec E7000271, Руководство пользователя

Страница: 15 / 18

Page | 15
Installation / projector mounting
CAUTION Danger to life!
During the installation, the
Provisions of the BGV C1 and EN 60598-2-17!
The suspension devices of the projector must be designed and dimensioned so that they can
withstand 10 times the payload for 1 hour without permanent harmful deformation.
The installation must always be carried out with a second independent suspension, For example, a
suitable fishing net. This second suspension must be designed and installed in such a way that no
part of the installation can fall in the event of a failure of the main suspension.
During the assembly, conversion and dismantling, the unnecessary stay in the area of movement
areas, lighting bridges, high-level workplaces and other hazardous areas is prohibited.
The contractor shall ensure that safety and technical equipment is inspected by experts prior to first
commissioning and after major modifications before commissioning.
The contractor has to ensure that safety engineering and mechanical engineering equipment is
inspected at least every four years by an expert in the scope of the acceptance test.
The contractor has to ensure that safety and mechanical equipment.
Method:
The projector should ideally be installed outside the area where people are sitting.
IMPORTANT! OVERHEAD ASSEMBLY REQUIRES A HIGH MEASUREMENT OF EXPERIENCE. This
includes (but is not limited to) calculations to define the load bearing capacity, the installation
material used and regular safety inspections of the
material and the projector used. Never attempt
to perform the installation yourself if you do not have such a qualification; Plumber. Improper
installation may result in injury and / or damage to property.
The projector must be installed outside the hand area of people.
If the projector is to be suspended from the ceiling or high beams, etc., it is necessary to work with
the traverse system. The projector must never be mounted free-swinging in the room.
Danger: Projectors can cause serious injuries when f alling! If you are in doubt about the security of a
possible installation, DO NOT install the projector!
Before mounting, make sure that the mounting surface can withstand at least 10 times the load on
the projector.