Etec DVA900, Инструкция по эксплуатации

Страница: 11 / 17

A-B Repeat
A-B
AB
Audio-L & Audio-R
DVD FUNCTION
Subtitles
Camera Angle
Language
Locating A Title
Title Menu Function
The DVD Player has the capability to display
subtitles in English, French and Spanish.
1. Press the
SUBTITLE button. The subtitle
menu will appear. Select the desired language
by pressing the
SUBTITLE button.
2. To remove the subtitles from view, press
the
SUBTITLE button until they disappear.
Note: The disc being played must be
multi-subtitle encoded.
The ability to change the camera angle allows
the viewer to play director and watch a movie
from different perspectives.
1. Press the
ANGLE button on the remote
control. With each press, the camera angle
changes.
2. The button may be pressed only when the
flashing angle icon appears in the unit's
display panel.
Note:
The camera angle can be changed only when
playing DVDs encoded with multi-angle capability.
The unit has the capability to show movies in English,
French and Spanish.
1. Press the
LANGUAGE button. The language
menu will appear. Select the desired language
by pressing the
LANGUAGE button.
Note:
The disc being played must be multi-language
encoded.
DVD discs are normally divided into titles, which
are then sub-divided into chapters. A Specific title
or chapter can easily be located. Specific titles
can be found using the title menu function if the
disc contains a title menu, or through its unique
title number.
1. Press the TITLE button. The title menu will
appear on the TV screen.
2. Press the appropriate scroll button to select the
desired title. A title may also be located by pressing
its assigned number with the number buttons.
3. Press the
ENTER button. This will start playback
from chapter 1 of the selected title.
Note:
Some discs do not respond to this function. If
different instructions appear on the TV screen,
follow those instructions. The instructions given
here describe the basic procedure. Procedures may
vary depending on the content of the DVD disc.
Press "A-B" once to set a start-point, press again to
set an end point and complete the setting. The
selected section A-B will be repeated. The third
press will cancel this function.
The default audio setting for DVD audio is; Digital
5.1Channel Surround Sound. The AUDIO-L &
AUDIO-R buttons will only operate when the
STEREO mode has been activated. To change the
DVD audio setting to STEREO, you must first
access the MAIN MENU and scroll down to AUDIO
MENU. Access the Audio Menu and change the
settings for the CENTER SPEAKER,Rear
SURROUND SOUND SPEAKERS, and
SUBWOOFER to
NONE and the PRO-LOGIC
to OFF . Now the DVD audio output is STEREO
and the AUDIO-L & AUDIO-R buttons will function
properly. By pressing these two buttons will select;
Left audio only, Right audio only, or STEREO.