Etec DVA608, Руководство пользователя, Страница: 12 / 14

SETUP MENU
(Press SETUP button)
16:9 Wide Scr
When you connect
to a wide screen TV,
this setting will allow
the original aspect
ratio will be display
full screen.
NOTE
Depending on the DVD
disc format, e.g. 2.35:1,
the wide screen setting
may still having black
margins above and
below the picture.
Enter this menu to setup the digital audio output format for
Different signal types. The selectable output formats are
PCM or Raw.
Press
SETUP b
utton
Highlight "Audio",
Press ENTER , Audio sub menu appears.
TV System
TV System menu is to change up the broadcast system:
AUTO
NTSC
PAL
Audio (digital audio)
Auto switch from NTSC to PAL system according
to the disc, if not, the default system is NTSC
NTSC TV system
PAL TV system
Highlight the desired item and press
ENTER
button,
Highlight the desired
Press
ENTER
Press
SETUP
item,
button to confirm.
button to save the setting and quit.
If the digital output is set in"RAW"mode.there wil Be no analog output for
DTS bitstreaml
NOTE:
Highlight "Rating",
Repeatedly pressing
ENTER
button
to change the setting:
1. Kid Safe
2. G
3. PG
4. PG_13
5. PG_R
6. R
7. NC_17
8. Adult
Highlight "Password" selection,
Press ENTER button to lock.
Press
SETUP
butto n to save the setting and quit.
Enter this menu to setup the rating level of the player.
The player will require a password to play any disc with
rating level higher than the setting.
Highlight "Password" selection,
Press
ENTER
input the 4 digits password,
button. The rating lock release.
Rating
Press
SETUP
Highlight "Rating",
Press
ENTER
button
button, Rating sub menu appears.
TROUBLE SHOOTING
Should your DVD player develop a problem, please check below before
requesting service:
Symptom Check and Action
No Power Check if the power cord has been properly connected to the power outlet.
Check if the main power has been switched on.
Does not play No disc, load a disc.
Disc has been loaded upside down. Place the disc with the label side up.
Disc's region code does not match to the player.
Disc is not correct type for player.
Disc is damaged or dirty, clean the disc or try another disc.
Moisture may be condensed inside the player. Remove the disc and
leave the unit power on for one or two hours.
No Picture
Check if the TV set has power on, use TV remote to select A/V signal for
DVD rather than broadcast.
Check if the system connection is proper and secure.
Check if the connection cables are damaged.
Clean the disc.
Picture
noise / distorted The disc is dirty or damaged. Clean the disc or try another disc.
Reset the color system of the player or the TV set.
Try to direct the player to the TV set instead of via other components,
such as a VCR.
Picture not full
screen Select the screen format from the player's SETUP MENU,
see "
SETUP MENU " of t his manual.
Select the screen format from DVD disc menu.
Malfunction
Should the player develop a malfunction, unplug the player for
30 minutes. After 30 minutes, turn the power to the player ON and the restore
function should reset the player.
No sound Press the remote control L/R/ST button and
re-select the audio setting on the remote.
Bass Management
Front Speakers
Center Speaker
Surround Speakers
Subwoofer
Test Tones
Center Spkr Delay
Surr Spkr Delay
Digital Output
:On
: small
: Small
: small
: present
: off
: No Delay
: No Delay
: All
-21- -22-