409-35011
Rev D
60
of 83
Selecting an article
To select an article, complete the following steps.
1. In the upper left corner of the screen, touch the menu button to the left of the
Name
field (Figure
69). A menu is displayed, listing the names of existing cables on the machine.
2. Touch a name to select that article. The machine updates parameters and is ready for production
use.
Figure 69: Article dialog
1
New article button
2
Copy article button
3
Delete article button
4
Menu button
Creating an article
A user must have Operator D permissions (see Table 6) to create an article. You can create an article by
specifying all the parameters, or by copying an existing article and changing only the parameters that are
different.
Figure 70: Creating an article
1. In the upper left corner of the screen, do one of the following:
Touch the
New Article
button.
Select an existing article and touch the
Copy Article
button.
