ETCR ETCR2000+, Руководство пользователя

Страница: 14 / 32

-11-
the critical value of alarm setting
---Low battery & voltage is displayed. At this time, it not
guarantee the accuracy of the measurements
---Measured current is 8.40A
---Lock the current value displayed
---Store the current value as the data
Unit No.37
.
⑻
--- Access to the stored data unit No.8
--- Measured resistance is 30
Ω
--- This data is measured in a lot of signals interference
VI. Operating Method
1.Boot up
Boot , DO NOT press the trigger, don
’
t open jaws, nor
clamp any wire
Boot complete, show
“
OL
Ω”
, then press the trigger,
open jaws, clamp the measured wire
Before booting up, the trigger should be pressed for
a couple of times to ensure the jaws are well closed.
Boot, must maintain clamp meter natural resting
state, don
’
t flip Clamp, don
’
t be imposed outside
force on the jaw, otherwise can not guarantee the
accuracy of measurement
Press POWER Key to Boot, first, automated testing LCD,