VS-61 Installation Guide Rev 05.12 Page 4 of 17 Essential Trading Systems Corp
Hardware Connections
Plug the Ethernet Patch Cable into the back of the VS-61 and into your network. If needed, plug
the power supply into the back of the VS-61 (Figure E).
Figure E
Verify the VS-61 is correctly connected to the network by observing the Status LEDs (Figure F).
•
The green Status LED illuminates after approximately five seconds to indicate the start of
the firmware verification and load process.
•
The yellow Link LED is illuminated when the network link to the speaker is established. The
Link LED blinks to indicate network traffic.
Figure F
