2 of 5
S P e C i f i C a t i o n S
GEnEraL
•
60-leD array
•
etl listed to Ul1573 – the standard for stage and studio
lighting units
•
iP20-rated for indoor use
•
Power and DmX in/thru connections for easy setup
•
User-friendly control interface with multiple modes and
fixture settings
phySicaL
•
rugged die-cast, all-metal housing
•
available in black (standard), white or silver (optional) or
custom colors (contact factory)
•
C-clamp
•
Positive locking double-clutch fixture body
•
Slot for glass or stainless steel patterns and
Soft focus Diffuser
•
Wide accessory slot with sliding cover for motorized pattern
devices or optional iris
•
Hanging yoke standard. optional yoke/floor stand available
ELEcTricaL
•
100VaC to 240VaC 50/60 Hz universal power input
•
neutrik power in and thru connections
•
requires power from a non-dim source
•
Up to nine fixtures (15a max) may be linked via power thru
connector (ten fixtures total per circuit) when used with r20
relay module or Unison echo relay Panel. Consult breaker
trip curves when used with other equipment
•
inrush
- 120V: 11a (first half-cycle)
- 240V: 15a (first half-cycle)
LED*
•
50,000-hour leD life (50,000 hours to 70% intensity)
•
60 luxeon
®
rebel leD emitters
*See additional leD notes on page three
coLor
•
exclusive x7 Color System
™
seven-color leD array
•
Beautifully illuminates skin tones and other objects for
natural appearance and high color rendering
•
Broad-spectrum color interacts seamlessly with
conventional sources
•
exclusive red-shift option emulates tungsten
dimming performance
opTicaL
•
available with lustr+, Daylight or tungsten leD arrays
•
Use the included soft-focus diffuser for creating washes or
soft light
•
Best performance using etC’s eDlt lens tubes
•
Can use all etC Source four interchangeable lens barrels: 5°,
10°, 14°, 19°, 26°, 36°, 50°, 70°, and 90° field angles, as
well as 19°, 26°, 36°, and 50° eDlt lenses
•
for better performance, use the new leD 50° barrel
conTroL
•
DmX512 in and thru via five-pin Xlr connectors
•
multiple control options including rGB, strobe, and console-
free master/Slave mode
•
See DmX Control table for additional information
•
15-bit virtual dimming engine provides smooth, high-quality
theatrical fades and minimizes color shift during dimming
•
rDm functionality for address and setting changes
ETC
®
Source Four LED Series
Source Four LED
™
S P e C i f i C a t i o n S
ThErMaL
•
ambient operating temperature of -4° to 104°f (-20° to
40°C)
•
active electronic thermal management for droop-free
operation
•
Quiet fan cooling
•
fixture is designed for continuous operation up to 104°f
(40°C) ambient temperature and requires free flow of air
around fixture housing
a D D i t i o n a l o r D e r i n G i n f o r m a t i o n
power input cables
Use information below to order 5’ power input leads with factory-fitted connectors
MoDEL
DEScripTion
DPa-a
5’ PowerCon
™
to parallel blade U-ground
(edison) connector
DPa-B
5’ PowerCon to 20a two-pin and ground
(stage pin) connector
DPa-C
5’ PowerCon to grounded 20a twistlock
connector
DPa-X
5’ PowerCon to bare-end power input lead
power Thru Jumpers
note: Power thru jumpers connect to fixture’s output (thru) connector to provide
link to successive fixtures
MoDEL
DEScripTion
DPJ-5
5’ PowerCon to PowerCon
fixture to
fixture jumper
DPJ-10
10’ PowerCon to PowerCon
fixture to
fixture jumper
Diffusers
MoDEL
DEScripTion
S4leD-SfD
Source four leD—Soft focus Diffuser (included)
S4leD-SWD6
Source four leD—Smooth Wash Diffuser for
6.25” gel frame slots
S4leD-SWD7
Source four leD—Smooth Wash Diffuser for
7.5” gel frame slots
S4leD-SWD12
Source four leD—Smooth Wash Diffuser for 10°
lens tubes
S4leD-SWD14
Source four leD—Smooth Wash Diffuser for 5°
lens tubes
the Soft focus Diffuser fits into a standard a-Size pattern holder and delivers
beautiful homogenized light when not in sharp focus. also, use with patterns for
dappled and soft-edge projections.
the Smooth Wash Diffuser is used when extra-smooth blending of multiple Source
four leD fixtures is required. the smooth wash diffuser is placed into the gel frame
slot of the lens tube.
