4
Source Four CE Assembly Guide
Assembling the Basic Luminaire
1:
Follow instructions under
Assembling the Lamp Socket
on
page 6
.
2:
Follow instructions under
Reflector Housing Assembly
on
page 9
.
3:
Follow instructions under
Shutter Barrel Assembly
on
page 11
.
4:
Assemble Lens Tubes following the instructions for your applicable lens degree application.
5:
Insert lens tube assembly (4–12) fully into the shutter barrel assembly (3). Align the mounting
hole with the slot and secure with knob (13). Install screw (15) and spacer (16) on top of shutter
barrel. See
Figure 1
.
6:
Install reflector housing (2) onto shutter barrel assembly (3) and align the two mounting holes.
Secure with screw (15) top of reflector housing and knob (13) on bottom. Tighten both securely.
See
Figure 1
.
7:
Install the lamp socket assembly (1) to the reflector housing (2) and secure with brass knurled
screw on rear of lamp socket assembly.
8:
Secure the earth bond wire to the luminaire body using screw (19) and washer (18).
9:
Release the gel retaining clip by pushing it sideways while gently pulling backwards.
10:
Insert the colour frame.
11:
Lock the clip by pushing sideways while gently pushing it forward.
Содержание Source Four CE 405
Страница 34: ...30 Source Four CE Assembly Guide ...
Страница 35: ...Lens Tube 90 31 ...
