Configure the Fixture
23
Set Menu
Set the Status Options
Navigate: Main Menu
→
Set
→
Status
Parameter
Value
Description
No DMX Mode
•
Close Shutter
•
Hold
•
Auto Program
Control mode when DMX is absent. The default
value is Hold.
Pan Reverse
•
ON
•
OFF
Reverse the pan movement of the fixture. The
default value is OFF.
Tilt Reverse
•
ON
•
OFF
Reverse the tilt movement of the fixture. The default
value is OFF.
Pan Degree
•
630
•
540
Change the pan rotation of the fixture from the
default setting of 540 degrees to 630 degrees.
Encoders
•
ON
•
OFF
Turn on or off the encoder feedback for pan and tilt
movement. You may want to turn off encoders when
working on a fixture so that you can move pan and
tilt without the fixture automatically moving back to
position.
Hibernation
•
OFF
•
1–99 minutes
Hibernation mode forces the LEDs and stepper
motors to power off when the fixture loses DMX
control signal for a set period of time. The default
time setting is 15 minutes.
Refresh Rate
•
2.4 kHz
•
16 kHz
Set the refresh rate of the fixture. The 16 kHz setting
is quieter than the 2.4 kHz setting and creates a
beam that does not flicker when shown on camera.
The 2.4 kHz setting prioritizes flawless, stepless
dimming.
P/T Home Mode
•
Standard
•
Tilt First
•
Pan First
Set the order in which pan and tilt homing is
performed.
•
Standard: the pan and tilt home procedures run
simultaneously.
•
Tilt First: the tilt home procedure runs to
completion, then the pan home procedure begins.
•
Pan First: the pan home procedure runs to
completion, then the tilt home procedure begins.
Dim Control
•
Master Base
Intensity
•
Independent
Base Intensity
Set the modules to which the Dimmer DMX channel
is applied.
•
Master Base Intensity: the Dimmer DMX channel is
applied to the Base, Flex, and Pixel modules.
•
Independent Base Intensity: the Dimmer DMX
channel is applied only to the Base module.
