Page 3 of 3
6.
Repeat this entire procedure for the secondary processor, starting at step 1.
7.
Remove diskette 5 from the drive and store your upgrade diskettes. Return the monitor and keyboard
you used in this procedure to their customary places.
8.
Turn off the secondary processor.
9.
Turn both processors on to return them to a tracking configuration.
10. Press [Setup] [1] [Enter] [1][3] [Enter] [Enter] [Enter] to reset your system before you reload your show
or create a new one.
Rebuilding your I/O configuration
Rebuilding your I/O configuration
Rebuilding your I/O configuration
Rebuilding your I/O configuration
Rebuild your I/O configuration file if you were using version 3.x system software before this upgrade. We
recommend you also rebuild the I/O configuration file even when upgrading from 4.x system software to
ensure that your configuration matches your present needs.
1.
After completing the upgrade, re-start your system and go to the I/O Configuration menu (press
[Setup] [2],
Input/Output Configuration
, [Enter]).
2.
Select one of the six options in the I/O Configuration menu and press [Enter] to bring up a number of
options. Using the printout you made before starting this upgrade, make your choices in the menus
provided for these options.
3.
Repeat step 2 as many times as needed to restore your selections as desired.
4.
Store your rebuilt I/O configuration file on a diskette. For information about diskette backup
procedures, see Chapter 21 of your version 4.4
Obsession II User Manual
.
Americas
Middleton, Wisconsin • USA • Tel: (+1) 608 831 4116 • Fax: (+1) 608 836 1736 • (+1) 800 775 4382 • [email protected]
Europe
London • England • Tel: +44 (0)20 8896 1000 • Fax: +44 (0)20 8896 2000 • [email protected]
Asia
Hong Kong • Tel: (+852) 2799 1220 • Fax: (+852) 2799 9325 • [email protected]
International
3030 Laura Lane • Middleton, Wisconsin 53562 • Tel: (+1) 608 831 4116 • Fax: (+1) 608 836 1736 • www.etcconnect.com
Copyright © 2001 Electronic Theatre Controls, Inc. All Rights Reserved. Product information and specifications subject to change.
4152M1019
• Rev A • Released 5/01
