ETC Net3 Conductor, Руководство по установке

Страница: 1 / 4

ETC Setup Guide
Net3
®
Conductor Network Services Gateway
Net3 Conductor Setup Guide Page 1 of 4 Electronic Theatre Controls, Inc.
Corporate Headquarters

Middleton, WI, USA

Tel +608 831 4116

Service: (Americas) service@etcconnect.com
London, UK

Tel +44 (0)20 8896 1000

Service: (UK) service@etceurope.com
Rome, IT

Tel +39 (06) 32 111 683

Service: (UK) service@etceurope.com
Holzkirchen, DE

Tel +49 (80 24) 47 00-0

Service: (DE) techserv-hoki@etcconnect.com
Hong Kong

Tel +852 2799 1220

Service: (Asia) service@etcasia.com
Web: www.etcconnect.com

© 2015 ETC. All Rights Reserved.

Product information and specifications subject to change.
4266M2200

Rev C

Released 2015-03

ETC intends this document to be provided in its entirety.
Overview
Net3 Conductor Network Services Gateway provides powerful and flexible control for integrated
lighting systems. This setup guide will guide you through the setup of the Net3 Conductor
including hardware, electrical and data connections, unit power up, and connection to the built-
in web interface.
Features
Net3 Conductor provides the following features:
• A central repository for all system configurations
• Multiple network services for simple network lighting system integration.
• Logging of real-time errors.
• Reporting tools providing access to historical errors using user defined filters.
• Real-time logging and notification of system errors using e-mail or SMS messaging.
• Conductor is configured using the built-in web interface or its companion software, Net3
Concert.
• On board LCD displaying information including the firmware version number, current date,
time and time zone, IP address and system uptime. Additional displays include indication of
firmware update processing.
Help from ETC Technical Services
If you experience difficulty during setup or installation of the Net3 Conductor, additional
information is available from
www.etcconnect.com or by contacting ETC Technical Services at the
nearest office to you; contact information is listed below.
Setup and Connect
General Use
Net3 Conductor ships standard with non-slip padded feet for use on a table top. Alternatively, the
unit can be installed into a standard 19” rack enclosure when used with the included 1U Half
Width Rack Mount Kit (4260K1001).
Note:
The Net3 Conductor unit must be mounted in a rack in a horizontal flat
orientation, or flat on a table top.