M520 series oscilloscope with rollmode
User’s Guide
- it is red, if the data acquisition is not started (and triggered) yet
- it is yellow, if the data acquisition has started already, but it is interrupted by ARM-
ing system
- it is green if the data acquisition is in progress.
4.11. Vertical range controls
The vertical range controls are located in the right of the main window.
Fig. 4.11.1. – Range controls
Channel A controls are located in left, channel B controls are located in the
right side.
- changes the range to less sensitive
- changes the range to more sensitive
4.12. Vertical shift controls
The vertical shift controls are located in the right side of the main window.
Fig. 4.12.1. – Vertical shift controls
Channel A controls are located in left, channel B controls are located in the
right.
- the waveform is shifted upwards by smallest possible value
- the waveform is shifted downwards by smallest possible value.
Click between slider and button to shift waveform by approx. 1 point.
The vertical shift can be set by dragging the slider as well.
- 18 -
