ETC echoflex ElahoTouch, Руководство пользователя

Страница: 43 / 54

Showfile Management 36
Showfile Management
This section explains how to create , save , open , delete , import , and export show files. Software
upgrades and creating a default show file are also covered.
Files
All filing operations:
•
New
•
Open
•
Save
•
Save As
Show files:
•
Save as default
•
Remove default
•
Delete
•
Import
•
Export
Advanced:
•
Import Settings
•
Update Firmware
•
Install Extras
•
Export Logs
CAUTION:
All data is stored internally in non-volatile memory. Do not switch off the power
until any pending save operation is completed, or you may lose data. It is strongly advised that
you make periodic backups of important data to an external memory stick using the
Export
function.
File, New
Start a new show by going to Setup>Files>New.
Note:
You will be warned that this action will clear the memory. Select Yes to clear memory
and start a new show, or No to cancel.
The new show will be based on the template default show , which is customizable.
File, Open
Open an existing show file by going to Setup>Files>Open.
Note:
Show files must be in the device's internal storage before they can be opened here. If
the file is located on a memory stick, you will need to use import first.
File, Save
Save the show by going to Setup>Files>Save.
The show will be saved with the name you last gave it. If you have not yet saved the show with a
name, you will be prompted to enter a show file name. Use only alphanumeric characters, and
avoid symbols.