ETC echoflex ElahoTouch, Руководство пользователя

Страница: 34 / 54

27 ElahoTouch User Manual
parameters are included in the recording by pressing the Include Options button.
channels:
•
Active: Only channels with an intensity above zero are included.
•
Selected: Only channels currently selected (surrounded by a green box on the channel
map or brightly lit on the bumps) are included.
•
All: All channels are included.
Include:
•
Intensity / Color: Only the intensity and color mixing channels are included.
•
Position: Only the position (pan/tilt) channels are included.
•
Beam: Only the beam channels are included (beam includes non-fadable colors such as
wheels and scrollers).
Edit Sequence List
When record is used for an already created sequence, you will enter the Sequence List editor
where you can change the content of a
sequence list.
Here you may change the step names and fade times. Using the Edit Step button, you may
change the content of the steps. Pick the step you want to edit in the sequence list in the upper
part of the display. You can also insert
new steps , copy steps , delete steps , and edit steps .
Press Exit to leave the editing mode. Any changes made will be stored in the selected sequence.
New Step
Inserts a new sequence step. The new step is added to the next free whole-numbered step at
the end of the sequence list. The new step may then be given another number, including a
fractional or 'point' number.
For example, to insert a step between steps 4 and 5, you would enter 4.5.
Note:
The sequence list is not re-numbered when a step is inserted.
Copy Step
Copies the selected step and creates a new step. The new step is added to the next free whole-
numbered step at the end of the sequence list. The new step may then be given another
number, including a fractional or 'point' number.
For example, to insert a step between steps 4 and 5, you would enter 4.5.