ETC Echo Inspire Station Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 44

background image

Record/Program Mode

9

Record/Program Mode

Program mode allows adjustment of the consecutive range of presets and zones assigned to
the station by allowing you to set the starting preset or zone, respectively. Enter program
mode by pressing and holding the

[Record / Program Mode]

for three seconds.

The Function switch determines whether edits are made to the consecutive range of presets
or zones. Program adjustment is not available while in Custom Mode. In the case of the 4
button station, the dip switch selection also determines what is programmed to the station.

Record allows snapshot of all current output levels into the designated preset for playback.
Reference

Record Preset

Program Preset Start

Step 1: Set the station into Preset control mode by sliding the Function switch to its highest

position.

Step 2: Press and hold the

[Record / Program Mode]

button for three seconds to enter

Program mode. The “Mode” LED illuminates (steady amber) and the first preset
button LED for the station flashes the current (first) preset controlled. (For example,
if the first preset controlled is preset 3, the button LED will flash 3 times.)

Step 3: Push any station button to increase the starting preset number by one, the count

always begins at 1. The station will update the LED indication, flashing the LED to
reflect the new preset number. (For example, pushing the station button eight times
will set the first preset for the station to preset 8). All station preset controls will be
consecutively assigned beginning with the specified count.

Step 4: When the desired preset number is set, press and release the

[Record / Program

Mode]

button to save the new setting. The “Mode” LED turns off and the station

LEDs will display the new setting before returning to normal operation.

Record Preset

Inspire stations provide recording (snapshot) of presets using the current output levels for the
controlled zones in the space. The station must be set up for Preset control prior to recording.

Step 1: Press the

[Record / Program Mode]

button, an amber LED will blink during a 10

second record period.

Step 2: Push the button of the preset control you would like to record (snapshot). This stores

current levels to the designated preset, exits record mode, and activates the newly
recorded preset.

Note:

Program mode is non-functional and does not apply while the Function

switch is set to Custom.

Note:

To change the preset button assignment to a lower number than what is

currently set, exit Program Mode then reenter Program Mode and the preset

count will restart at 1.

«
...
11
12
13
14
15
...
»

Содержание Echo Inspire Station













































Отзывы:

Нет отзывов

Похожие инструкции для Echo Inspire Station

AF-600 FP Series

Бренд: GE Страницы: 7

Бренд: Jafar Страницы: 9

Бренд: Samson Страницы: 78

Бренд: Rachio Страницы: 16

Бренд: Zolix Instruments Страницы: 22

Бренд: Eaton Страницы: 2

Бренд: Eaton Страницы: 2

PowerXL DX-NET-ETHERCAT-2

Бренд: Eaton Страницы: 3

Бренд: Walimex Pro Страницы: 68

Бренд: OJ Electronics Страницы: 8

Бренд: OJ Electronics Страницы: 112

Бренд: OJ Страницы: 17

FUTERA XLF Series

Бренд: RBI Страницы: 128

Бренд: S&C Страницы: 11

Бренд: S&C Страницы: 24

Бренд: S&C Страницы: 19

Бренд: We Care Solar Страницы: 46

Бренд: Watts Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды