2 of 5
S P e C i f i C a t i o n S
GEnERAL
• 60 leD colour mixing profile spotlight fixture
• iP20 rated for dry location use
• Ce compliant
• Power and DmX in/through connections for easy setup
• User-friendly control interface with multiple modes and
fixture settings
PhySiCAL
• rugged die-cast all-metal housing
• available in black, white, silver grey, custom colours by request
• Positive locking double-clutch yoke
• Slot for B-sizeglass, stainless steel or film gobo patterns and
Soft focus Diffuser media
• Wide accessory slot with sliding cover for motorised effect
devices, a-size gobos or optional drop-in iris
ELECTRiCAL
• 100VaC to 240VaC 50/60 Hz universal power input
• Power factor 0.97
• max. consumption (see table on page three)
• neutrik power in and through connections
• Up to 9 fixtures may be linked via power in/thru connectors
per 15a circuit
• requires power supply from a non-dim source
LED*
• 50,000 hour leD life (50,000 hours to 70% intensity)
• 60 luxeon
®
rebel 2.5W leD emitters
*See additional leD notes on page three
CoLoUR
• exclusive x7 Color System
™
seven-colour leD array
• Broad-spectrum colour interacts seamlessly with
conventional sources
• Beautifully illuminates skin tones and other objects for
natural appearance and high colour rendering
• exclusive optional red-shift option emulates tungsten
dimming performance
oPTiCAL
• available with lustr+, tungsten or Daylight leD arrays
• Use the included soft-focus diffuser for creating washes or
soft light
• Best performance using etC’s eDlt lens tubes
• Can use all etC Source four interchangeable lens tubes: 5°,
10°, 14°, 19°, 26°, 36°, 50°, 70°, and 90° field angles as well
as 19°, 26°, 36°, and 50°* eDlt lenses
*for best performance use the new leD-specific 50° barrel
ConTRoL
• DmX512 in and through via five-pin Xlr connectors
• multiple control options including rGB, strobe, and console-
free master/Slave mode
• See DmX Control table for additional information
• 15-bit virtual dimming engine provides smooth, high quality
theatrical fades and minimal colour shift during dimming
• rDm functionality for address and setting changes
ThERmAL
• ambient operating temperature -20° to 40°C
• active electronic thermal management for
droop-free operation
• Quiet fan cooling
• fixture is designed for continuous operation up to 40°C
ambient temperature and requires free flow of air
around fixture housing
ETC
®
Profile Spotlight Series
Source Four CE LED
®
a D D i t i o n a l o r D e r i n G i n f o r m a t i o n
PhoTomETRiCS
Photometrics tables for all Source four leD/lens tube combinations
can be found in the document:
Source Four LED Photometrics Guide
available for download from www.etcconnect.com
Power input Cables
PART no.
DESCRiPTion
7401B7008
1.5m PowerCon™ to bare-end power input cable
3x1mm2 (Spare)
the above power input lead ships standard with each fixture.
Power Thru Jumper cables
Jumpers connect to fixture’s thru connector to provide link to successive fixtures
PART no.
DESCRiPTion
7410K1101
1m PowerCon™ to bare-end power thru cable
3x1mm2
7410K1102
1m PowerCon™ to PowerCon™ fixture to fixture
jumper cable 3x1mm2
7410K1103
2m PowerCon™ to PowerCon™ fixture to fixture
jumper cable 3x1mm2
7410K1104
5m PowerCon™ to PowerCon™ fixture to fixture
jumper cable 3x1mm2
7410K1105
1m fixture to fixture twin jumper cable with both
power and DmX connectors
7410K1106
2m fixture to fixture twin jumper cable with both
power and DmX connectors
7410K1107
5m fixture to fixture twin jumper cable with both
power and DmX connectors
Diffusers
moDEL
DESCRiPTion
7060a4019
S4 leD - Soft focus Diffuser media (Spare)
7060K1001
S4 leD - Smooth Wash Diffuser media for use in
159mm Colour frames (19-26-36-50 lens tubes)
7060K1002
S4 leD - Smooth Wash Diffuser media for use in
190mm Colour frames (14-70-90-Zoom lens tubes)
7060K1003
S4 leD - Smooth Wash Diffuser media for use in
305mm Colour frames (10° lens tube)
7060K1004
S4 leD - Smooth Wash Diffuser media for use in
356mm Colour frames (5° lens tube)
the Soft focus Diffuser delivers beautiful homogenised light when not in sharp focus.
also, use in combination with gobo patterns for dappled and soft edge projections.
the Smooth Wash Diffuser is used when extra-smooth blending of multiple Source
four leD fixtures is required. the smooth wash diffuser is placed into the gel frame
slot of the lens tube.
