ETAS
Technical Data
XETK-S30.0 - User’s Guide
32
7
Technical Data
7.1
System Requirements
7.1.1
ETAS Compatible Hardware
ES51x, ES592, ES593-D, ES595, ES600, ES8xx, ES910 (INCA)
7.1.2
PC with one Ethernet Interface
A PC with one open Ethernet interface (1 Gbit/s or 100 Mbit/s, full duplex) with
RJ-45 connection is required. Ethernet interfaces that are implemented with an
additional network card in the PC must feature a 32-bit data bus.
7.1.2.1
Requirement to ensure successful Initialization of the Module
To deactivate the power saving mode
Choose in Windows System Control Center / Device Manager / Network
Adapter the used network adapter by double-click. Deactivate the "Allow the
computer to turn off this device to save power" option in the "Power Manage-
ment" register. Confirm your configuration.
The manufacturers of network adapter have different names for this function.
Example:
• "Link down Power saving"
• "Allow the computer to turn off this device to save power"
7.1.3
Software Support
You need following software versions to support the XETK-S30.0:
NOTE
Half Duplex mode and Half Duplex Ethernet interfaces are not supported.
NOTE
It is imperative you disable the function which automatically switches to
power-saving mode on your PC network adapter when there is no data traffic
on the Ethernet interface!