ETAS XETK-S21.0, Руководство пользователя

Страница: 14 / 65

ETAS Introduction
XETK-S21.0B - User Guide 14
3 Introduction
This chapter contains information about the following topics:
• Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
• Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.1 Applications
The XETK-S21.0 is an emulator probe for the Freescale MPC57xx and for the
STMicroelectronics EM57xx microcontroller family. It is a typical serial XETK
designed for use with the JTAG portion of the Nexus debug interface (IEEE/
ISTO 5001).
Fig. 3 - 1 XETK-S21.0
The XETK-S21.0 supports the standard full duplex 100Base-T Ethernet inter -
face and can be connected directly or via ES51x/ES59x/ES600 modules to the
PC. No additional ETAS modules are required for the access to the ECU. The
XETK-S21.0 can be used for rapid prototyping applications (bypass) as well as
for measurement and calibration applications.
NOTE
For supported MPC57xx microcontrollers, refer to chapter 7.1.3 on page 34.
XETK-S21.0
XETK ECU interface connectors 12 pin ERNI plus 7 pin JST
Power supply for ED devices (VDDS -
BRAM)
min. 1.25 V
SBRAM sense Yes, on board or external sense
Pinless triggering Yes
Timer triggering Yes