manualshive.com logo in svg

ETAS ETK-V1.1, Руководство пользователя

Поделиться
Скачать
ETAS ETK-V1.1 Скачать руководство пользователя страница 17

ETK-V1.1 - User’s Guide

17

ETAS

Hardware Description

The upper side of the 

printed circuit board

 is fitted with

• the microcontroller device (packaged into the specified CSP package), 
• the VertiCal connector (standardized 156-way connector).

Fig. 4-3

VertiCal Base Board (fitted with Solder Balls, Side View)

The lower side of the printed circuit board has a footprint similar to that used by 
MPC5500 family devices in standard production packages. 
The lower side of the board is fitted either 

• with solder ball footprints for direct and permanent soldered connection 

to the development ECU PCB (see Fig. 4-3) or

• with a "BGA adapter" connector allowing connection and removal from 

an ECU development PCB which has been fitted with a compatible "BGA 
receiver" socket (see Fig. 4-4).

Fig. 4-4

VertiCal Base Board (fitted with Pin Array/ BGA Adapter, Side View)

4.1.3

Typical Usage

The standard ECU microcontroller is replaced by the VertiCal base board with the 
same dimensions and the same pinout. 
The VertiCal base board connects the ECU with the ETK-V1.1.

4.2

Architecture

Fig. 4-5 "ETK-V1.1 Architecture" shows the blockdiagram of the ETK-V1.1. 
The microcontroller can read via the VertiCal connector from one of the two 
pages of the data emulation memory and can write its data directly to the mea-
surement data memory. These two memories (data emulation memory, mea-
surement data memory) are using the same address space and are realized inside 
the same DPRs.

Printed Circuit Board

VertiCal Connector

Printed Circuit Board

VertiCal Connector

Pin Array/
BGA Adapter

Содержание ETK-V1.1
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды