ETAS ES921.1, Руководство пользователя

Страница: 8 / 42

ETAS Basic Safety Notices
ES921.1 - User Guide 8
3 Basic Safety Notices
This chapter contains information about the following topics:
• “General Safety Information” on page 8
• “Requirements for Users and Duties for Operators” on page 8
• “Intended Use” on page 8
3.1 General Safety Information
Please observe the Product Safety Notices ("ETAS Safety Notice") and the fol -
lowing safety notices to avoid health issues or damage to the device.
ETAS GmbH does not assume any liability for damages resulting from
improper handling, unintended use or non-observance of the safety precau
-
tions.
3.2 Requirements for Users and Duties for Operators
The product may be assembled, operated and maintained only if you have the
necessary qualification and experience for this product. Improper use or use by
a user without sufficient qualification can lead to damages or injuries to one's
health or damages to property.
The assembler of the system is responsible for the safety of any system incor -
perating the equipment.
General safety at work
The existing regulations for safety at work and accident prevention must be
followed. All applicable regulations and statutes regarding operation must be
strictly followed when using this product.
3.3 Intended Use
The ES910.3-A has a simulation controller and the ECU interfaces CAN, LIN,
ETK and XETK and also one interface for Daisy Chain modules (ES4xx/ES63x/
ES93x modules).
If additional interfaces are required, the extension slot of the ES910.3-A can be
used with the ES920.1 FlexRay Module, the ES921.1 CAN Module or with the
ES922.1 CAN FD Module.
NOTE
Carefully read the documentation (Product Safety Advice and this User's
Guide) that belongs to the product prior to the startup.