ETAS
Technical Data
ES595.1
-
User Guide
46
8.1.2
Fulfilled Standards and Norms
The module adheres to the following standards and norms:
8.1.3
Environmental Conditions
8.1.4
Maintenance the Product
Do not open or change the module! Works on the module housing may be exe
-
cuted only by qualified technical personnel. Send defect modules to ETAS.
8.1.5
Cleaning the product
We recommend to clean the product with a dry cloth.
Norm
Test
EN 61326-1
Electrical equipment for measure
-
ment, control and laboratory use -
EMC requirements
EN 61000-6-2
Immunity for industrial environments
EN 61000-6-3
Emission standard (residential, com
-
mercial and light-industrial environ
-
ments)
1)
EN 60 529
Degrees of protection provided by
enclosures (IP code)
EN 60 068-2-32
Basic environmental testing proce
-
dures; part 2: tests; test Ed: free fall
1)
: For the external power supply of the LIN interface a direct current power
supply or a battery must be used as operation voltage. Between module and
power supply unit cables with a maximal length of 30
m are permitted.
Temperature range (operation)
-40
°C bis +70
°C
-40
°F bis +158
°F
Temperature range (storage)
(module without packaging)
-40
°C bis +85
°C
-40
°F bis +185
°F
Relative humidity (non-condensing) 0 to 85% (operation)
0 to 95% (storage)
Implementation altitude
max. 5000
m/ 16400
ft
Protection class
IP30
Degree of pollution
2
NOTE
The module is suited for use in interiors, in the passenger compartment or in
the luggage compartment of vehicles. The module is
not
suited for installa
-
tion in the engine compartment and similar environments.
