ETAS
Technical Data
ES592.1
-
User Guide
45
This ensures that the devices are recycled in a resource-saving way represent
-
ing no danger to health or the environment.
Fig.
8
-
1
WEEE Symbol
The WEEE symbol (see Fig.
45) on the product or its packaging
shows that the product must not be disposed of as residual garbage.
The user is obliged to collect the old devices separately and return them to the
WEEE take-back system for recycling.
The WEEE directive concerns all ETAS devices but not external cables or batter
-
ies.
For more information on the ETAS GmbH Recycling Program, contact the ETAS
sales and service locations (see chapter 8 on
42).
8.7
Use of Open Source software
www.etas.com
.
8.8
System Requirements
8.8.1
Hardware
Operation of the ES592.1 requires a power supply voltage of 7
V to 29
V DC.
PC with one Ethernet interface
A PC with one open Ethernet interface (100 Mbit/s, full duplex) with RJ-45 con
-
nection is required. Ethernet interfaces that are implemented with an additional
network card in the PC must feature a 32-bit data bus.
Requirement to ensure successful initialization of the module
NOTE
It is imperative you disable the function which automatically switches to
power-saving mode on your PC network adapter when there is no data traffic
on the Ethernet interface!