ETAS
Getting Started
ES592.1
-
User Guide
27
6
Getting Started
The “Getting Started” chapter includes a description of the assembly, applica
-
tion examples, as well as notes on cabling and configuration of the ES592.1.
6.1
Assembly and Locking
6.1.1
General Installation Recommendations
6.1.2
Fixing a Module onto a Carrier System
The ES592.1 has a rugged metal housing with nonskid plastic feet. The unit can
easily be screwed onto a carrier system for installation in a vehicle or in the lab.
The screw thread for attaching your device is already contained in the housing
and is easily accessible.
To fasten the ES592.1 housing:
1. Remove the plastic feet from the bottom of the module by
pushing a minus screwdriver between the housing bottom and
the plastic foot.
2. Lifting off the plastic foot using the screwdriver as a lever.
Fig.
6
-
1
Levering Off the Plastic Foot
3. A threaded hole will become visible under the plastic foot. The
threads for fastening the module are located both on the bot
-
tom of the ES592.1 housing.
CAUTION
The module can be damaged or destroyed.
The modules are only admissible for assembly and operation on components
or in locations which guarantee adherence to the technical data of the mod
-
ules during operation (see chapter 8 on
42).
