ETAS ES5340.2, Руководство пользователя

Страница: 56 / 120

ES5340.2 Electric Drive Simulation Board - User’s Guide 56
FPGA Models ETAS
Inputs
You can connect the inputs of the PMSM model to other models (in the Connec-
tion Manager of LABCAR-IP) or stimulate them in the Signal Center in
LABCAR-EE.
Tab. 4-5 Inputs of the PMSM model
Outputs
You can connect the outputs of the PMSM model with analog or digital outputs
(in LABCAR-RTC) and to other models (in the Connection Manager of
LABCAR-IP).
Tab. 4-6 Outputs of the PMSM Model
Input [unit] Description Default value
Rd [
Ω
] Coil resistance in d direction 0.0125
Rq [
Ω
] Coil resistance in q direction 0.0125
Ld [H] Coil inductance in d direction 0.000211
Lq [H] Coil inductance in q direction 0.000211
Psi [Vs] Magnetic flux 0.0382
Theta_M [°C] Engine temperature 20.0
Output
[unit] Description Signal available as
multiplexer input
I_d [A] Current in d direction Analog MUX
I_q [A] Current in q direction Analog MUX
I_phase_X
(X=U,V,W) [A] Current Phase X Analog MUX
U_back_EMF_X
(X=U,V,W) [V] Voltage X back EMF Analog MUX
ZeroPos [] Signal is active if phase voltage
U_Phase_U > U_Phase_V Digital_MUX
T_el [Nm] Torque of electric motor -
P_Loss_M [W] Ohmic losses of the motor -