ETAS
Getting Started
ES420.1 - User’s Guide
38
5.2.3.3
Connecting the Module to the Component
To connect the ES400 module to the component, you require a 2 mm Allen key
(minimum length 20 mm).
To connect the module and the component:
1. Position the module to the right of the other component.
2. Align the integrated assembly elements of the module with the
drill holes.
3. Insert the Allen key into a hexagon socket on the right-hand
side of the module.
4. Screw the two parts together by turning the Allen key clock
-
wise as far as it will go within the module.
Both parts are now connected mechanically on one side.
5. Insert the Allen key into the other hexagon socket of the mod
-
ule.
6. Screw the two parts together by turning the Allen key clock
-
wise as far as it will go within the module.
Both parts are now completely connected mechanically.
5.2.3.4
Connecting to Other Modules
To connect the ES400 module to other modules, you require a 2 mm Allen key
(minimum length 20 mm).
TIP
Screw the two parts together without getting them off-
thread!
TIP
Screw the two parts together without getting them off-
thread!
TIP
You can only successively screw additional modules, but not module blocks,
onto the right-hand side of this module.