ES415.1 - User’s Guide
39
ETAS
Getting Started
4. Screw the two modules by turning the Allen key
clockwise as far as it will go within the module.
Both modules are now completely connected
mechanically.
Connecting to Other Modules
To connect the ES400 module to other modules, you require a 2 mm Allen key
(minimum length 20 mm).
To connect to other modules:
1. Assemble other modules in accordance with the
procedure described in the section 5.2.2
on page 37
5.2.3
Attaching ES400 Modules to Other Components Using the Integrated Assembly
Elements
The integrated assembly elements of the ES400 modules can not only be used to
connect modules to each other but also to connect them to other components.
Here, you connect the ES400 module to the component using the integrated
assembly elements. Screwing the two together works in the same way as con-
necting several modules.
Fig. 5-7
Attaching a Module to Other Components with the Integrated
Assembly Elements
Note
Screw the two modules together without getting
them off-thread!
Note
You can only successively screw additional modules, but not module blocks,
onto the right-hand side of this module.