Installing I/O Modules
17
4
Installing I/O Modules
This section describes how to install I/O modules.
4.1
Assembling the Front Panel to the PB4350XXX Module
Proceed as follows to assemble the front panel on a module of the type
”PB4350XX”:
• Tighten the printed board brackets as shown
in Fig. 4-1 with the Pozidrive flathead screws
M2.5x10 provided on the module.
Fig. 4-1
Tightening the Printed Board Brackets
Note
I/O modules of the type ”PB1651XXX” are delivered with the front panel
assembled; modules of the type ”PB4350XXX” come with a front panel
which is not assembled. If you want to mount a module of type
”PB4350XXX” on the ES1651.1-B Carrier Board, you first have to assemble
its front panel.
Содержание ES1651.1-B
