ETAS ES160.1, Руководство пользователя

Страница: 8 / 48

ETAS Basic Safety Notices
ES16x.1 - User Guide 8
If the product is not used according to its intended purpose, the protection of
the product may be impaired.
Requirements for Operation
• Use the product only according to its specifications If the product is
used in any other way, product safety is no longer ensured.
• Note the requirements for the ambient conditions.
• Do not use the product in a wet or damp environment.
• Do not use the product in potentially explosive atmospheres.
Electrical Safety and Power Supply
• Observe the regulations applicable at the operating location concerning
electrical safety as well as the laws and regulations concerning work
safety.
• Only connect electric circuits with safety extra-low voltage in accor -
dance with IEC 61140 (devices of class III) within the voltage limits for
accessible parts as per IEC 61010-1.
• Ensure compliance with the connection and setting values (see chapter
“Technical Data” on page 29).
• Do not apply any voltages to the connections of the product that do not
correspond to the specifications of the respective connection.
Power Supply (ES160.1)
The product is supplied from an external lab supply or vehicle battery with oper -
ating voltage.
Power Supply (ES162.1 / ES165.1)
The product is supplied with operating voltage from the connected ETAS prod -
ucts.
Power Supply
• The power supply for the product must be safely disconnected from the
supply voltage. For example, use a car battery or a suitable lab power
supply.
• Only use lab power supplies with dual protection for the supply network
(with double / reinforced insulation (DI/RI)). This requirement is met by
lab power supplies that comply with IEC/EN 60950 or IEC/EN 61010.
• The lab power supply must be approved for use at an altitude of 5000 m
and in ambient temperatures of up to 70 °C.
• In regular operation of the products as well as very long standby opera -
tion, a discharge of the vehicle battery is possible.