Etac Transit, Руководство пользователя

Страница: 20 / 28

20
Etac / Transit / www.etac.com
User manual
Castors: Clean castor wheel axles as required.
Chassis: Clean the chassis with non-abrasive detergent, pH value
5-9 or with 70 % disinfectant solution. Rinse and dry.
Upholstery: Wash, see labels on each item.
In the event of problems, contact your dealer or Technical Aids
Centre.
If necessary, lubricate moving parts/joints with cycle oil
or similar.
Fault-finding chart
The wheelchair is pulling
diagonally
•
Pump up the tyres (pneumatic tyres)
•
Check and adjust the height and angle of the front fork attachments
•
The user’s weight is not evenly distributed in the wheelchair
The wheelchair feels “heavy” to
propel
•
Pump up the tyres (pneumatic tyres)
•
Rear wheel mountings are incorrectly fitted
•
Clean the castor axles from hair and dirt
The wheelchair feels “heavy” to
turn
•
Pump up the tyres (pneumatic tyres)
•
Check that the front fork attachments are not too tight
•
Check and adjust the angle of the front fork attachments
•
Clean the castor axles from dirt
Brakes not effective •
Adjust the wire length
The castor wheels “wobble”
•
The front forks are not tight enough
•
Check and adjust the height and angle of the front fork attachments
The wheelchair is hard to fold/
unfold
•
The upholstery is too tight
•
Clean and lubricate the cross-brace under the seat
The wheelchair feels “awkward”
•
Pump up the tyres (pneumatic tyres)
•
Check that screws, nuts and bolts are properly tightened
Maintenance
Etac
Box 203, 334 24 Anderstorp, Sweden
Tel +46 371 58 73 00
Fax +46 371 58 73 90
www.etac.com