6
Notice
Always check the product before use and after washing.
Never use a defective product. If the product shows signs of
wear-and-tear, it must be scrapped.
Read these instructions carefully.
It is important that carers receive instruction in manual
handling. Etac offers advice and training for carers. For further
information, contact Etac.
Always use the correct manual handling techniques
Encourage the user to assist where possible
To ensure that the user feels safe and that every manual
handling is smooth, always plan the manual handling in
advance.
There is a risk that the user may slide off. Never leave
the user alone on the edge of the bed.
Never leave the product on the floor.
Always conduct a risk assessment, and ensure that the
assistive product can be used for the individual user
and, in combination with other devices, that it is safe
for the user and carers.
For use at temperatures between 0ºC-60ºC.
If in any doubt - please contact Etac.
Material:
Top side: Nylon
Inner surface: Polypropylene board (removable)
Foam: Polyethylene
Handles: Polyester
Assembling system: Hook & loop.
The product should be checked regularly, preferably each time it
is used, and especially after washing.
Check that there is no damage to seams or fabric.
Never try to repair a product yourself.
Never use a defective product.
Washing instructions:
Remove board before washing.
Do not add fabric conditioner.
This product can be cleaned with a solvent-free cleaning agent
with a pH level between 5 and 9, or a 70% disinfection solution.
Material and cleaning
Special features
