Etac E1722710, Руководство пользователя

Страница: 10 / 12

10
Molift EvoSling / www.etac.com
Maintenance
Wash symbols:
Slings can be washed at temperatures
up to 85º C.
Tumble drying, max 45º C.
Do not iron
Do not dry clean
Do not bleach
Cleaning and disinfection
Washing and drying at higher temperatures
wears out the material faster. The sling must be
inspected regularly, preferably prior to each lifting
operation but especially after it has been washed.
Make sure not to damage or
remove labels when cleaning.
Recycling
Refer to “Recycling instructions” for how to
properly dispose of product. This can be found on
www.etac.com.
Periodic Inspection
Periodic Inspection Scope
Periodic inspection is a visual examination of the
sling according to Periodic Inspection Report for
Etac/Molift Slings. This can be found on
www.etac.com.
If the inspection reveals any
danger to safety, the sling should
immediately be taken out of
service and be disposed of.
Periodic inspection must be carried out at least
every 6 months. More regular inspection may be
required if the sling is used or washed more often
than is normal. The inspection must be performed
by trained personnel.
When performing a periodic inspection, the
inspector shall fill out the inspection report for
Etac/Molift Slings. The reports should be retained
by the person(s) responsible for inspecting the
sling. If the inspection reveals defects and dam-
ages, the owner shall be notified.
When periodic inspection is completed the inspec-
tor shall mark periodic label showing the date
when periodic inspection is performed.
The periodic inspection label can be found behind
the product label, and this will then indicate when
the next service should be performed (within 6
months from last inspection).
When the sling is used for the first time, the
periodic inspection label should be marked with
month and year. That way it is easier to know
when the first periodic inspection should be
performed.