eta Viki 0599, Руководство пользователя

Страница: 14 / 32

III. INSTRUCTIONS FOR USE
Fill the kettle with clean cold water up to max., turn it on and let the water boil before first
use. Then Pour the water out and repeat the process several times (at least five times). You
will boil the kettle out properly this way and get rid of potential taste of plastic. If you feel
like you have aftertaste of plastic from boiled water, we recommend to repeat the procedure
according to the instructions in the paragraph IV. MAINTENANCE – cleaning the kettle.
Another recommendation is to leave the empty kettle open for 24 hours.
APPLICATIONS
Fill the kettle with drinking water. Close the lid by snapping. Turn on the kettle ( A1 button,
position I ). Function of the electric kettle is signaled with the control light A3 . After boiling
the appliance switches off automatically. Before reaching the boiling point, you can switch
off the appliance by turning the A1 button to the 0 position.
ATTENTION
– When heating water, the lid must be closed, otherwise the kettle will not turn OFF.
– In bigger tilting of the electric kettle backwards, particularly when it is filled up to
maximum, water can flow out from the electric kettle in the bottom part of the kettle.
This does not affect safety or other functions and it does not mean any failure of the
electric kettle. In the case of tilting the electric kettle with hot water there is a risk of
scalding. Therefore do not tilt the electric kettle.
IV. MAINTENANCE
Unplug the appliance from power supply by taking the fork of the power cord
out of the socket! Clean the kettle only when it is cooled down! Do not use rough
and aggressive detergents (e.g. sharp objects, scrapers, diluting agents or other
solvents)! The casing of the electric kettle is made of top-quality plastic material and the
heating bottom is made of top-quality stainless steel, but in common use, impurities from
water get stuck on them (water scale), particularly above the heating element. It is not rust
or another material defect of the kettle container and the appliance is not subject to
a complaint for this reason.
Cleaning the kettle
Pour about 50 g citric acid to the kettle with the water scale sediment. Fill the kettle to about one
half and mix. After it dissolves, fill the kettle to 3/4 of the maximum amount of water. Place the
electric kettle on the stand and turn it on. Before boiling, turn off the kettle, let the solution take
effect for about 10 minutes and then pour it out. Clean the kettle thoroughly with clean water.
Repeat the whole procedure if the kettle is too soiled. Clean the electric kettle regularly!
Cleaning the sieve ( A2 )
Take the sieve from the kettle. Clean it from possible sediments in running water using
a fine brush. Then put the sieve back in the opposite way.
Expert service must do the large maintenance or to intervene into inside parts of the
appliance! Non-observance of the instructions of the manufacturer cancels the right
for guarantee repair!
14
GB
/ 27