eta Sting 0430, Руководство по эксплуатации, Страница: 20 / 36

Storing the accessories and the vacuum cleaner
Slide the upholstery nozzle to the cavity in the adapter (Fig. 15). The vacuum cleaner can
be hung on a clip using the cavity in the handle (Fig. 17).
IV. MAINTENANCE
Always store the vacuum cleaner at a dry place, far enough from heat sources
(e.g. fireplace, stove, heating element ) and protect it against weather conditions
(e.g. rain, sunshine ). Treat surface of the appliance with a soft and damp cloth, do not
use coarse and aggressive detergents! For failure-free operation of the vacuum cleaner
we recommend checking the aggregate and the general condition of the vacuum cleaner
in a specialized service centre after 300 hours of operation, but not later than in 3 years.
When storing, always set the floor nozzle to the carpet position (i.e. with the brush
retracted), thus you will prevent bending of the bristles. Store the appliance properly
cleaned at a dry, dust-free place out of reach of children and incapacitated people.
Floor nozzle / floor nozzle with rotation brush
After any vacuuming it is recommended to check visually the brushes or collectors for
possible impurities. If you find some impurities, remove them in the way specified below.
Cut threads and hair with scissors and remove them. If hair or threads are twisted around
the mounting of the drive shaft and if they cannot be removed in the way described
above, the impurities have to be removed by dismantling the nozzles
V. TROUBLESHOOTING
Problem Cause Solution
Motor won‘t start Power supply not conne -
cted
Check the cord, plug and
the socket
The 0/I button is not in the 0
position
Turn the switch to I position
or to „ “ position
The lid cannot be closed Dust filter inserted in the
suction space improperly
Check/correct the position
of the carton front of the
filter
The suction performance is
not sufficient
Regulation in the MIN
position.
Set the regulation to MAX.
Dust filter full Replace the dust filter
Clogged micro-filters Replace the micro-filters
The nozzle or the accesso -
ries are clogged
Remove the blocking
objects
20
GB