eta STELLA 0461, Инструкция по эксплуатации, Страница: 20 / 48

A6 - full filter signaling A13 - dust filter
A7 - handle A14 - suction micro-filter
B - accessories
B1 - floor nozzle B4 - crevice nozzle
B2 - suction hose B5 - textil filter
B3 - suction tube
III. VACUUM CLEANER PREPARATION
Hose
- Connect hose B2 to the vacuum cleaner by inserting the end piece to suction vent A1 to
the maximum position (Fig. 4). You will hear a clicking sound.
- Disconnect the hose by pressing the button on the end piece and remove the hose by
pulling it slightly.
Tube
- You can connect tube B3 with hose handle B2 by slight pushing the handle to the tube
(Fig. 3).
- You can disconnect the tube by pulling the handle slightly out of the tube.
Floor nozzle
- Connect and disconnect the accessories B1 in the same way as the tube (Fig. 2).
Crevice nozzle
- Connect and disconnect the accessories B4 in the same way as the tube (Fig. 3).
You can connect the appliance directly to the hose handle or to the tube.
IV. USE OF VACUUM CLEANER
Remove all packing material, take out the vacuum cleaner and the accessories. Pull out
necessary length of power cord
A8 and plug the power cord into a socket. Assemble the
vacuum cleaner accessories B1 , B2 , B3 (Fig. 2, 3, 4). Floor nozzle B1 is designed to be
used to clean carpets or smooth flooring (Fig. 5). If the floor nozzle is fitted with a brush,
pull it out by switching over a flap when vacuuming hard floorings. You can use crevice
nozzle
B4 for vacuuming places that are hard to access (Fig. 6). The vacuum cleaner can
be switched on or off by pushing button A4 marked with the symbol
I I
(Fig. 7). The
suction power can be adjusted with the control on hose handle B2 (Fig. 8). The minimum
suction power is recommended for fine fabrics (e.g. curtains, drapes). The maximum
suction power is recommended for floor coverings (e.g. heavy-duty carpets). After
finishing work, switch off the vacuum cleaner and unplug it from the power supply. By
switching button
A5 with symbol (Fig. 7) the power cord will be wound automatically.
The vacuum cleaner can be held and carried by handle A7 .
Full dust filter signaling
If the coloured field is displayed permanently on the indicator A6 (Fig. 9) while the floor
nozzle is lifted above the cleaned surface at the maximum suction power , the dust filter
must be replaced.
Disregard changes on the indicator during vacuuming.
20
GB