eta Steam Force 1, Инструкция по эксплуатации

Страница: 22 / 68

The more you turn steaming regulation wheel
G
towards symbol , the more outgoing
steam there will be (Fig. 5). If you place the iron to the rest position, automatic production
of steam will stop (more steam may be going out for a short time).
Warning
- When water container
I
is filled with water over the permitted limit (
max. 280 ml ), steam
can be created even in the rest position.
- At places with hard water we recommend diluting it with distilled water. You will get
the information about water hardness at water-management authorities, or at the local
sanitary station. In the case of water hardness > 15 °N we recommend filling the iron in
the following ratio:
Water hardness Ratio of tap water : distilled water
medium 2 : 1
hard 1 : 1
very hard 1 : 2
Sprinkling appliance (additional spray)
It is used for moistening fabrics and it is effective in ironing extremely creased fabrics.
It is activated by repeated pressing of additional spray button
D
. We do not recommend
applying additional spray to fine fabrics (e.g. silk and synthetic ) as the used water may
stain the fabric.
Intensive steaming (steam shock)
Use only if steam ironing is insufficient. In this case press intensive steaming button
E
several times (Fig. 6A - ). Thus you will get additional steam except for the steam
created by standard steaming.
Warning
When you press intensive steaming button
E
several times, water may drip from the ironing
plate due to excess water in the steam chamber. Do not consider this as faulty operation.
VERTICAL system
It is intensive vertical steaming for steaming freely hanging textiles (e.g. hanging clothes,
curtains, drapes). Set thermostat regulation wheel
H
to the area marked for steaming
(Fig. 2 – steam). Stretch the fabric slightly with one hand and move the iron vertically
bottom up (Fig. 6B - ). Press the intensive steaming button
E so that you achieve
vertical steam shocks. Do not hold the intensive steaming button pressed continuously and
do not use it more than 10 times consecutively.
Storage
After finishing ironing, pour out the unused water from container
I
( be careful, it can be
hot
), or let the rest of the water evaporate and let the iron cool down. Then set symbol
„
dry “ on steaming regulation wheel
G
against the mark on the water container (steaming
off). Wind power cord
L
over the back side of cover
K
and put the iron to the rest position
(Fig. 8) out of reach of children and incapacitated persons.
22
GB